Electronics Forum | Mon Aug 24 07:32:34 EDT 2009 | hurr
Hi Joane, this flux is primarily designed for wave soldering. I think that manual soldering it´s possible. Certainly it´s very hard to dispensing correct amount of the flux. Succinic acid is one from all ingredients of this flux. If you have this
Electronics Forum | Thu Apr 26 12:06:08 EDT 2007 | basem
$100K for this entire line. We are thinking of getting a Chinese made reflow oven that looks pretty good at $25K. Also, we need to deposit solder using a dispenser as stencil printing will be reserved only for higher volume boards. It will not be pra
Electronics Forum | Fri Feb 21 02:00:53 EST 2003 | successmani
Hi, I would like to know how Conductive adhesives and UV cure adhesives are dispensed. I know that nonconductive adhesives are dispensed through jetter, Auguer pump annd other contact type method. I am puzzled and curious to know whether there is any
Electronics Forum | Tue Aug 22 03:04:07 EDT 2006 | PP
Any help/suggestion is much appreciated I am doing lots of BGA Reworks from a small uBGA with a few balls to a large BGA with over 1500 balls. The reworks have been done on SRT 1100 Series Machine for many years. SRT 1100 Machine is good for the c
Electronics Forum | Wed Feb 10 05:23:17 EST 2021 | karl_willoughby
Hello. I am sourcing machines for an SMT line (for the first time) and would like to understand features of current and earlier model SPI and AOI machines. In the intended application, a high volume of PCAs aren't required to be processed but there
Electronics Forum | Thu Dec 14 03:04:30 EST 2000 | Anuar Ahmad
Dear all, I wish somebody to help me to find any site that provide white paper about SMT and COB. Any information would be very much appreciated. Thank you.
Electronics Forum | Fri Nov 01 20:24:15 EDT 2019 | dekhead
> Machine Setup >> Options >> TTG & BTG Enable
Electronics Forum | Wed Jan 09 15:24:49 EST 2002 | mregalia
Thanks Chris. As I was writing my last message our mailperson dropped off the latest issue of Circuit Assembly. It has an article on mixing SMT and COB on the same board. The author recommends as a compromise 10-20 micro inches of gold over 70-100 of
Electronics Forum | Fri Feb 21 20:14:53 EST 2003 | MA/NY DDave
Hi I don't know of anything special in the ways of dispensing since they don't normally care about the differences of UV or Conductive or pastiness. The only difference is WHAT you are striving to do with the adhesive and how the adhesive moves as
Electronics Forum | Fri Feb 21 19:49:10 EST 2003 | neil
There are a number of companies who have used traditional screen printing to depsosit standard and conductive adhesive.